top of page

sCRUNCHie Tutorial

Quick and easy scrunchie tutorial to bring some nostalgia back into your life.
20200517_155450.jpg

Step 1

  • Cut your strip (or strips). I prefer to use dimensions 25" long by 3.5" wide, but you can play around with those dimensions and find what you you like best.

* You can use any type of fabric for these. It's a great way to use up old scraps of fabric.

20200517_155559_edited.jpg

Step 2

  • Fold your strips in half with the right side of the fabric facing in.

20200517_155725.jpg

Step 3

  • Starting about an inch to inch and a half down from the corner on the open side, stitch or serge along the edge.

20200517_155816.jpg

Step 4

  • When you get to the end, finish about an inch from the bottom edge.

20200517_155847_edited.jpg

Step 5

  • Your strip should look like this.

20200517_160313.jpg

Step 6

  • Flip the tube right side out.

20200517_160358.jpg

Step 7

  • With the seam straight and facing up (not twisted), grab the to ends, and pinch or pin them together.

20200517_160507_edited.jpg

Step 8

  • Take the tube to your machine.

  • Starting at the corners, stitch the two short ends together. This takes a bit of playing around, because the fabric has to be manipulated and curved, as you sew.

20200517_160533.jpg

Step 9

This is a lot easier to do with knits than woven's, because you can stretch them as you sew.

20200517_160559.jpg

Step 10

  • Here's how the seam should look, when you're finished.

*Sometimes the fabric underneath gets a bit bunched, and it can be difficult to get this seam perfect, so it's okay if it's not perfect.

20200517_160608.jpg

Step 11

  • "Stretch" out the tube, so that the seam goes inside. This part is so satisfying!

20200517_161414_edited.jpg

Step 12

  • Measure out your elastic to 9.5". I choose this length so that it's not too tight on the wrist.

You can use either rope elastic or regular 1/4" elastic.

20200517_161549.jpg

Step 13

  • Put your elastic onto a bodkin turner or a safety pin.

20200517_161649.jpg

Step 14

  • Going in from the opening of your tube, bring your elastic all the way through the tube and out the other side.

20200517_161738_edited.jpg

Step 15

  • Scrunch up your fabric and tie off your elastic. Make sure the knot is really tight, so that it doesn't come apart when stretched.

20200517_161828.jpg

Step 16

  • Next, you need to close up the hole. You can either do this by machine, or by hand.

20200517_161926.jpg

Step 17

  • Fold the ends in and pinch or pin them together.

​

20200517_162031.jpg

Step 18

  • To close up my opening, I like to double up my thread, and run it through my wax, and then do an invisible stitch.

20200517_162142.jpg

Step 19

  • If your invisible stitch is sloppy like mine, just tighten it up a bit.

20200517_162157.jpg

Step 20

  • Voila!

20200517_162227.jpg

Step 21

  • Tie off your ends and if you can, tuck your knots into the seam.

20200517_164444.jpg

Step 22

  • All finished!!

  • Take a photo of your creation, and then show it off to the world!

bottom of page